High Quality 67*1.6*2/3 Carbide Carbide Insert/Blades for Cutting Titanium Alloy Bandsaw Blade

• Certification: ISO9001:2008
• Tooth Form: Alternate Tooth
• Diameter: 67mm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 67*1.6*2/3
• Function: Cutting
• Shape: Band Saw Blade
• Coating: Uncoated
• Type: Carbide Saw Blade
• Cutting Application: High Temperature Alloy/Titanium Alloy/Nickel Bas
• Quality Control System: 100% Inspection Before Delivery
• Feature: Long Lifetime, High Precision, High Efficiency
• Average Lead-Time: 7 Days
• Transport Package: Pallets/Cartons/Wooden Cases
• Specification: 27mm/34mm/41mm/54mm/67mm/80mm
• Trademark: Hante
• Origin: Made in China
• HS Code: 8202201000
• Production Capacity: 1500000m/Year

Product Description

 

High quality Carbide Tipped band saw blades list
Specifications		Teeth Form
27mmx0.9	1x.035	3/4  2/3
34mmx1.1	1-1/4x.042	3/4  2/3
41mmx1.3	1-1/2x.050	3/4  2/3  1.7/2.5  1.4/2  1/1.5  0.75/1  0.75/1.25
54mmx1.6	2x.063	3/4  2/3  1.7/2.5  1.4/2  1/1.5  0.75/1  0.75/1.25
67mmx1.6	2-5/8x.063	2/3  1.7/2.5  1.4/2  1/1.5  0.75/1  0.75/1.25
80mmx1.6	3x.063	2/3  1.7/2.5  1.4/2  1/1.5  0.75/1  0.75/1.25

1,High hardness, high red hardness, high wear resistance;
2,It is difficult to cut the metal materials, such as titanium alloy, stainless steel, hardened steel, raw material
     paste, nickel base alloy, cast steel, etc., can be cut freely;
3,Unique tooth shape design, with excellent chip removal performance;
4,Saw back refining technology, improve the fatigue strength of band saw.

Chemical composition of cemented carbide:

	(C)	(Si)	(Mn)	(P)	(S)	(Cr)	(Mo)	(V)	(W)	(Co)
cemented carbide		Co:10%  Residual refractory metal carbides:Wc,Tic,Nbc,Tac,Vc
HGS40	0.40	0.30	0.45	0.015	0.005	3.00	1.50	0.25

Cutting fault analysis :

project	cutting elements	band broking	sawing deviation	sawtooth crack	surface rough	sawtooth wear too fast	cutting vibration
Adjusting the sawing machine	two guide rods should be located close to the workpiece guide block is wearing parts, must be regularly checked and timely replaced.	The broken belt guide block is worn or the adjustment distance is too large	The broken belt guide block is worn or the guide rod is loosening or shaking				the cutting vibration guide block is not well adjusted
	Adjust the driven pulley to achieve the smooth operation of saw blade without dropping, stringing and biting the stop of the pulley.	the belt wheel is badly worn
	The iron brush used to remove sawdust is a vulnerable part. It should be checked and replaced in time.			The iron brush is damaged, and the saw belt groove is blocked by cutting debris		The iron brush is damaged and cannot work properly
	Adjust the driven pulley to have proper tension. For the saw belt used for a long time, the tension should be compensated and correctly matched with the concentration of cutting fluid (coolant).	saw belt tension too high	saw belt tension too low				saw saw belt tension too low
	Correctly mix the cutting fluid (coolant) concentration					too low cutting fluid (coolant) or too low coolant concentration
cutting parameters	Correct selection of saw band linear speed		saw band linear speed too low		saw band linear speed too low	saw band linear speed too low	carefully adjusted saw band linear speed
	correctly Choose saw feed line rate	saw band feed ratetoo large	saw band feed ratetoo large	saw band feed ratetoo large	saw band feed ratetoo large	saw band feed rate too large or too small	saw band feed rate too large or too small
Band saw blade selection	according to the characteristics of the workpiece to be cut, the tooth shape and the specification of the saw band are correctly selected	tooth saws too smal	tooth saws too smal	tooth saws too smal	tooth saws too smal	tooth saws too smal
	and the new saw band is used, the initial running-in is needed, the parameters are gradually increased from low speed and slow feed, For maximum service life				band saws no running or running time short	band saws no running or running time short	band saws no running or running time short
	Do not forcibly use Saw bands that have exceeded their service life		sawtooth worn and scrapped		sawtooth worn and scrapped
	According to the characteristics of the workpiece to be cut, correctly select the tooth hardness		tooth hardness Over smal	tooth hardness over small		tooth hardness over small
The cut artefact	Observe the working surface for defects and inclusion of sand					sand or rust Poor workpiece surface,
	to cut into a bunch of workpiece, ensure correct clamping method			the workpiece moves during cutting process			improper clamping of  workpiece

Top appliance:



Application Scenario:


 

A corner of the workshop:

Packaging and Shipping:



Factory Tour:

Shaoxing Shangyu Hante Machinery Equipment Co., LTD is specialized in producing bimetal saw blades, carbide band saws, food saws, woodworking alloy saws and selling high-speed circular saws, saws and circular saws. 

Our advantage:
1. Factory with 25 years of experience in the production of bimetallic band saw blades
2. Products have been exported to more than 60 countries and regions
3. All products have been strictly tested and quality assurance is provided
4. Provide after-sales service support
5. Main products: bimetal band saw blades, carbide band saw blades, high-speed circular saw machines, sawing machines, food processing machinery.